The Juki MF-7500 series state-of-the-art machine has been designed through a thorough ongoing study of seam quality. The machine is provided as standard with a great diversity of easily adjusted features to increase applicable types of sewing products. The well-balanced design of the machine achieves low-vibration and low-noise operation even under high-speed mode.
Seams can be adjusted depending on the application or material by changing the thread path or adjusting the thread tension controller, to produce soft and low-tensed seams for inner wear or to produce high-grade well-tensed seams for outer wear.
The optimized thread take-up mechanism and top covering thread path route contribute to an increased stability of top covering stitches. In addition, the machine is capable of performing sewing with a low tension applied to the thread to offer improved responsiveness to the sewing thread.
A differential-feed adjustment mechanism with a micro-adjustment mechanism to provide a constant differential-feed ratio. The differential-feed amount can be easily adjusted to the best suited value for the material to be used.
A feed dog inclination adjustment mechanism to work effectively at securing the material being sewn in place with increased reliability and thereby preventing uneven material feed and puckering.
A micro-lifter to keep the presser foot in a slightly raised position during sewing to prevent slippage and deformation.
JUKI MF7523... 3-Needle, 4 -Thread, Top & Bottom Coverstitch. With Micro-adjust Differential Feed... For 3 needle operations on knit shirts, underwear, sports and leisure wear... Sewing Speed max. 6,500 rpmStitch Length: 1.2-3.6 mm (up to 4.4mm)Stitch length controlled by dialStitch/Seam type 406EFa...
This machine comes in two table mount options:
Semi-submerged: The machine 's needleplate sits about 5-6 inches above the table top (Comes Standard)
Fully-submerged: The machine 's needleplate sits flush with the table (+$200.00 upon special request)